DreamLine SHDR-20307210F-HFR-01 Guia de Instalação

UNIDOOR/RADIANCE SHOWER DOOR/ENCLOSURE INSTALLATION INSTRUCTIONS MODEL: __________ STYLE: __________ SELECTOR: __________ Please choos

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 10Style “B” and “C”: Stationary Glass Assembly and Installation NOTE: Use parts from Diagram “B” or

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 11 12. Press the Anti-Water strip (19) on the vertical edge of the Stationary glass (11). Align the S

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 12 14. Adjust the Stationary glass (11) position to ensure that when the glass door is closed, there

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 1316. Apply the sealant along the connection of the Stationary glass to the wall and the Shower base

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 14Style “B”: Support bar* Assembly and Installation NOTE: Use parts from Diagram “B” for the Supp

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 15 18. Apply the sealant along the connection of the Stationary glass to the wall and the Shower base

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 16Style “C”: Glass Shelves* Assembly and Installation NOTE: Use parts from Diagram “C” for the Gl

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 17

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 18Style “D”: Stationary Glass Assembly and Installation NOTE: Use parts from Diagram “D” for the

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 19 22. Carefully butt the Stationary glass (11) up against the wall vertically. See Fig. 22 for deta

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 2 Preparation 1. After opening all boxes and packages, read this introduction carefully. Check t

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 20 24. Open the Glass Door (01) and carefully set the Stationary glass (11) aside. Remove the Wall br

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 21 26. To adjust and secure the Stationary Glass (11) in place, install the Bottom Bracket (18) to th

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 22Style “D”: Support Bar* Assembly and Installation NOTE: Use parts from Diagram “D” for the Supp

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 23 28. Apply the sealant along the connection of the Stationary glass to the wall and the Shower base

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 24Style “E”: Shower Enclosure Assembly and Installation NOTE: Use parts from Diagram “A” and Diag

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 25 30. Attach the Hinges (05) to the Glass door (01). See Fig. 30 for details. ATTENTION: Never se

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 26 32. Hold the door in place and mark the drill holes for both Hinges (05) on the wall. Set the door

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 27

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 28 35. Press the Anti-water strip (20) onto the vertical edge of the Stationary glass (11). Carefully

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 29 37. Place Stationary Glass (11) back into position and tighten it up to the Wall Bracket (24). Se

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 3 Detailed Diagrams of Shower Door Components 124567891011121314151617181991011121314151617181923221

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 30

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 31 40. Get three measurements:  from the top edge of the Glass door (01) to the upper body of the t

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 32 42. Run a strip of masking/painter’s tape along the connection of the Stationary glass with the wa

DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduseonlyandisnottr

TEL: 866-731-2244 FAX: 866-227-1533 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Doors and Enclosure please vi

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 4 NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using detailed d

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 5 Style “A”: Single Shower Door Assembly and Installation NOTE: Use parts from Diagram “A” for th

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 6 2. Place a piece of flat timber (5/8” thick) on the threshold or the shower base. Remove the corn

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 7 ATTENTION: Back plate of the hinge from inside the shower locates too close to the drilled holes i

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 8 6. Get three measurements:  from the top edge of the Glass door (01) to the upper body of the t

“UNIDOOR”, “RADIANCE” Rev.4 Ver.2 06/2013 9 ATTENTION; Prior to the next step, please be sure the part of the wall for installation of the L-