DreamLine SHEN-6134600-08 Guia de Instalação

ENIGMA X SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any time wit

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 10 8. Your Upper Guide rail (03) has been precut for your Shower model opening width: 48” or 60”

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 11 NOTE: Before you install the Stationary glass (02), you have to take the Glass door (05) into

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 12 11. Make sure the Stationary glass (02) and the Upper Guide rail (03) are leveled and aligned w

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 13 13. Drill the holes using Ø 5/16 drill bit and insert the Wall anchors (9b) for the Wall brack

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 14 15. Put the level to the Upper Guide rail (03) and use hex spanner wrench to adjust Guide rail

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 15 17. Drill the holes for the Guide block and the Threshold bracket using Ø 1/8” drill bit. Apply

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 16 19. Press the Anti-water strip (14) on the vertical edges of the Stationary glass (02) and the

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 17 21. Apply silicone along the connections of the Stationary glass and Return Panel with the wall

DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduseonlyandisnottr

TEL: 866-731-2244 FAX: 866-227-1533 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Enclosures please visit www.

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 2 Preparation 1. After opening all boxes and packages, read this introduction carefully. Check th

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 3 Detailed Diagram of Shower Enclosure Components Packing List 01 Door stopper 2pcs 12 Guide

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 4 Enclosure matching Shower base assemble size drawing NOTE: To match the shower base, you

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 5 Enclosure matching threshold assemble size drawing

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 6 Shower Enclosure Installation 1. This unit requires a minimum 23/4" wide threshold, showe

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 7 Fig. 3 3. Place the Return panel (22) on the preinstalled shower bas

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 8 4. Outline the position of the Wall brackets (19) on the wall and the shower base or threshold.

“Enigma X Enclosure” Rev.2 Ver.2 04/2013 9 6. Place the Return Panel (22) back in the designated position and assemble the Wall brackets (